Modelling and Simulation of the SGT5 – 2000E Gas Turbine Model for Power Generation

Authors

  • Egware H.O, Obanor A.I, Aniekwu A.N, Omoifo O.I and Ighodaro O.O

DOI:

https://doi.org/10.37933/nipes.e/3.2.2021.10

Abstract

In this paper, a steady-state flow modelling and simulation of an

SGT5 – 2000E gas turbine model was carried using Ebsilon

Professional Software. The design and off-design conditions were

considered according to the environmental ambient air

temperature. The model results were validated using design and

actual operating data by applying the error percentage analysis.

The validated results obtained ranged from -3.13% to 0.88% for

design condition, while -3.24% to 2.66% for off-design condition.

In addition, the model validation results were found to be in good

agreement with the actual installed operating data. Thus, the model

data obtained can be utilized for further studies such as energy,

exergy and environmental analyses.

Downloads

Published

2021-06-06

How to Cite

Egware H.O, Obanor A.I, Aniekwu A.N, Omoifo O.I and Ighodaro O.O. (2021). Modelling and Simulation of the SGT5 – 2000E Gas Turbine Model for Power Generation. Journal of Energy Technology and Environment, 3(2). https://doi.org/10.37933/nipes.e/3.2.2021.10

Issue

Vol. 3 No. 2 (2021): May

Section

Articles